ATUM STUDIO — SHORTCUTS & CONTROLS macOS • Version 1.0.1 • 20 November 2026 210 reference entries This is a reference to current controls, NOT newly installed shortcut assignments. ⌘ Command | ⌥ Option/Alt | ⇧ Shift Click/drag/menu = no dedicated key assigned in the current app mapping. Keyboard focus matters; editors and popups can handle keys before the main workspace. QUICK WORKFLOWS RECORD A LIVE INPUT Save the session → Settings / Audio: select the interface → choose an IN number in the track’s blank input field → click that track’s REC (MON if needed) → optionally set PRE COUNT → press R or main REC. The count sounds before recording from stopped; rolling punch stays immediate. Press REC again to punch out or STOP to finish. Select a track and click the three-line Takes icon to recall another recording. Use headphones with the internal mic. Recording LEDs show input even with MON off; session, input, arming and microphone permission are required. SEE 32 TRACKS Switch to TRACKS (F1) or enlarge the track side of SPLIT (F4), then drag V zoom down. Hide AUTO lanes if you want a waveform-only overview. The minimum row height is 16 logical points, so a very short window cannot fit 32 complete rows. There is no 32 button or numeric V readout. SEE AND EDIT AUTOMATION Choose READ for playback, then click AUTO to reveal existing curves → click a lane header to select the parameter → right-click the lane for Pencil / Line / Parabolic. Stop the transport to change global OFF/READ/WRITE. CREATE HIGHLIGHTED LINKED NAMES In Console, ⌘-click the channels you want → right-click a selected strip → Link Selected Channels → Linked Channel Colour. Linking also couples supported controls; it is not a purely decorative name colour. ======================================================================== KEYBOARD ESSENTIALS These are implemented shortcuts, not proposed assignments. Use them with the main workspace focused unless noted. Toolbar shortcuts do not run while a text or numeric editor is active. The existing arrow-key track/channel navigation is unchanged. ======================================================================== Play / stop playback Key / gesture: Space Starts or stops playback. Stop recording with the main Stop control if a popup has keyboard focus. Start / stop track recording Key / gesture: R or * Main transport recording, not the master mixdown recorder. Save the session, choose a supported input and arm a track first. R or * punches recording in/out while playback keeps rolling; Stop ends playback. Stop transport Key / gesture: Escape In the main workspace. In a focused popup or value-entry box, Escape can close/cancel that box instead. New session Key / gesture: ⌘ N Offers the existing unsaved-changes guard. Open session Key / gesture: ⌘ O Choose an .atum session. Save Key / gesture: ⌘ S Save the current session; choose a name/location if it has not been saved. Save As Key / gesture: ⌘ ⇧ S Save the session under another name/location. Undo Key / gesture: ⌘ Z Undo the previous supported edit. Editing a text field uses that field’s own undo. Redo Key / gesture: ⌘ ⇧ Z Redo a supported session edit when available. Select all tracks Key / gesture: ⌘ A Select all active input tracks. In a text field, select its text instead. Return to beginning Key / gesture: ⌘ ← Seek to zero when not recording. Rewind / forward Key / gesture: ⌥ ← / ⌥ → Seek backward/forward five seconds when not recording. Previous / next channel Key / gesture: ← / → Select the previous/next channel in Console or Split, following channel order. Takes priority over focused faders, scroll areas and scrollbars. Arrow keys do not scroll or change fader values. At the first/last channel, selection stays there. The corresponding track stays selected too. Previous / next track Key / gesture: ↑ / ↓ Select the previous/next track in Tracks, Split or the detached Tracks window, following track order. Arrow keys do not scroll. At the first/last track, selection stays there. The corresponding console channel stays selected too. Normal arrow-key caret movement remains available inside text/numeric entry and menus keep their own navigation. Selection may reveal an offscreen track/channel; this is not free scrolling. Extend selection with navigation Key / gesture: ⇧ + arrow Extend the selection using the applicable track/channel navigation arrows. Delete selection Key / gesture: Delete / Backspace Context-sensitive. The focused track canvas handles selected automation points. For audio, use the waveform’s right-click Delete Selection / Clip command. Fine adjustment Key / gesture: ⇧ + drag Finer parameter or automation-point movement. On console channel controls, Shift also selects individual-channel editing rather than linked/group movement. Confirm a numeric entry Key / gesture: Return Applies the number in the compact parameter-entry popup. Cancel a numeric entry Key / gesture: Escape Dismisses the parameter-entry popup without applying the text. Edit text Key / gesture: ⌘ X / ⌘ C / ⌘ V Standard cut/copy/paste in text fields. These are not audio-clip clipboard commands in this build. ======================================================================== TRANSPORT & WORKSPACE BUTTONS Click means a mouse-operated control with no dedicated keyboard shortcut in the current mapping. ======================================================================== Return to zero |< Key / gesture: ⌘ ← or click Move the playhead to the start. Rewind << / forward >> Key / gesture: ⌥ ← / ⌥ → or click Move five seconds backward/forward. STOP Key / gesture: Escape or click Stop playback and recording; finalise any active recording. PLAY Key / gesture: Space or click Start/stop playback. The button turns green while playing. Main red REC Key / gesture: R / * or click Start armed-track recording from stopped or rolling playback. Press again to punch out while playback continues. Stop ends recording and playback. Track REC buttons only arm tracks. PUNCH IN / OUT Key / gesture: Click while playing During playback, click to start recording armed inputs; click again to punch out while playback continues. The active label is OUT. This replaces the older range-marking behaviour. Time display Key / gesture: Click Cycle the three timer display styles. Transport locator Key / gesture: Drag locator slider or click the timeline ruler Move the playhead within the song when stopped or playing. Click the time ruler above the waveform lanes without changing track selection. Locating is locked during recording. TRACKS / CONSOLE / BUSS / SPLIT Key / gesture: Click, View menu or F1 / F2 / F3 / F4 F1 selects Tracks, F2 Console, F3 Buss and F4 Split. BUSS shows group buses and FX returns. F5 toggles Settings. On Mac keyboards hold Fn if the top row normally controls brightness/media. Function shortcuts do not interrupt text/numeric entry; modified function keys are not assigned. Switching a view does not stop playback or recording. Detach icon / track window Key / gesture: Click or Window menu Detach or recouple Tracks. In the detached Tracks window, click the two overlapping boxes at the far right of the toolbar to recouple. Closing that window also recouples it. Playback and recording continue; no dedicated keyboard shortcut. MIDI LEARN Key / gesture: Click; right-click to manage; Escape cancels learning Coverage: Channel, bus, FX-return and master EQ/DYN, sends/routing, faders, pan/trim/filters, tape and effect parameters, including phaser waveform switches. For Stereo Delay time, click the visible milliseconds display or time arrow while Learn is armed. Assignments work with editors closed and are retained on this Mac. Sweep an absolute control through the displayed pickup value before adjusting. Disabled linked/synchronised parameters retain their normal operating rules. Click MIDI LEARN, select a mix parameter, then move hardware. Click again or Escape to cancel. Notes operate on/off parameters; CC switches use 64 as the On threshold. Right-click MIDI LEARN (or Settings → MIDI → ASSIGNMENTS), choose an assignment, then select Absolute (pickup), Relative: NI 1/127, Relative: MCU sign bit, or Remove. Match the mode configured on the hardware; endless knobs can still send absolute values. NI 1/127 treats clockwise/counterclockwise messages as incremental steps rather than end positions, without pickup. All relative ticks are retained; mode changes persist and do not change the parameter. Existing assignments can change mode without relearning. Absolute CC/pitch bend retain soft pickup. Focused EQ knobs update immediately from MIDI without closing or toggling EQ. Custom mappings override factory controls and stay tied to fixed channel numbers. Mix edits use existing Undo and supported automation paths. No MIDI feedback, NRPN, paired 14-bit CC or HUI support. File/device/destructive actions are not learn targets. Right-click MIDI LEARN or open Settings → MIDI → ASSIGNMENTS, then choose Save MIDI assignments… or Load MIDI assignments…. Versioned .atum-midi files store up to 512 mappings, including device IDs, MIDI channel/CC/note/pitch, parameter ranges and encoder modes. Load while stopped; confirm replacement, or Cancel to keep the current mappings. Save first for a backup. Invalid files leave assignments unchanged. Loading resets pickup and automatically retains the loaded set on this Mac. Controller profiles and enabled input ports are not included; enable the matching devices in MIDI Settings. No audio, session mix or automation changes are made by saving/loading. No dedicated keyboard shortcut. Split divider Key / gesture: Drag vertically Change the balance of track and console space. Moving it fully up restores the fuller console controls. SETTINGS Key / gesture: Click Open/close Settings; the small X also closes it. CPU Key / gesture: Click Open/close the detailed CPU/core information panel. ======================================================================== RECORDING & TRACK HEADERS New tracks have blank inputs. Never assume the track number is a hardware input number. ======================================================================== Choose input Key / gesture: Click the input chevron/field Choose No input or an IN number supported by the current interface. Selecting or clearing an input keeps playback and the locator running; it does not replace recorded audio. Input changes are locked during capture. Audio device settings opens Settings directly on Audio. Clear input Key / gesture: Input menu → No input Leave the field blank and turn off that track’s REC and MON. Track REC Key / gesture: Click; ⇧ R for selected track Arm/disarm this mono track. A supported, explicitly chosen input is required. Completing a first recording on an empty, unrouted track assigns it to LR for playback; existing clip, bus and send routing is preserved. Track MON Key / gesture: Click; ⇧ M for selected track Monitor the selected live input; green means on. A supported input is required. Use headphones with the internal mic. During ordinary playback a completed take remains audible even when REC is armed; MON adds live input instead of replacing that take. During recording, an armed track monitors its live input. Track SOLO Key / gesture: Click; S for selected track Solo the track; yellow indicates the active state. Track MUTE Key / gesture: Click; M for selected track Mute the track; light red indicates the active state. LOAD Key / gesture: Click; ⌘ L for selected track Choose audio for that track. Stereo imports split into separate mono tracks/channels, hard-panned left/right. LOAD MULTI Key / gesture: ⌘ ⇧ L or click toolbar button Import multiple files, adding visible channel capacity as needed within the supported limit. LOAD SELECTED Key / gesture: ⌘ L or click toolbar button Load audio starting at the currently selected track. Select track/channel Key / gesture: Click its header/name Select the corresponding track and console channel together; linked members highlight together. Multi-select Key / gesture: ⌘ + click Add/remove tracks or channels from the selection. Range selection Key / gesture: ⇧ + click Extend the track/channel selection. Rename track Key / gesture: Double-click track name Or right-click its waveform/header and choose Rename Track. Console bottom labels can also be double-clicked. Move a track/channel Key / gesture: Drag the three-line handle Drop before/after another track or channel. Reordering is unavailable during recording. Header status LED Key / gesture: Display only Green indicates a populated channel; solo/mute states flash yellow/red. It is not a recording-input selector. ======================================================================== TRACK TOOLBAR, ZOOM & LAYOUT Zooming waveforms changes their display, not the recorded audio or mix level. ======================================================================== UNDO arrow Key / gesture: ⌘ Z or click Undo a supported session edit. AUTO / connected-points icon Key / gesture: A or click Show/hide automation lanes. This is separate from automation playback modes OFF/READ/WRITE. Inspector lock icon Key / gesture: I or click Keep track controls fixed while horizontally scrolling the timeline, or let them scroll. CH button Key / gesture: C or click, right of Inspector Show/hide the selected input channel’s console strip at the far left. Selecting another track retargets the strip. Follow arrow > Key / gesture: F or click On by default. Enable/disable automatic playhead following during playback and recording. Lanes extend beyond the previous media end without shrinking the waveform or changing its time scale. H minus / plus Key / gesture: - / = (or +), or click Decrease/increase horizontal waveform zoom by 10%. Hold Shift with the key or mouse click for 2% steps. Shift-plus also uses the fine step. Fine H zoom Key / gesture: ⇧ + drag H slider Use finer slider movement. Right-click the H slider for manual percentage entry. Pinch zoom Key / gesture: Two-finger pinch Continuous horizontal waveform zoom anchored around the pointer. V slider Key / gesture: [ / ] or drag Reduce/increase track height by 4 logical points with the keys, within 16–144. Double-click restores the normal 48-point height. Use AUTO separately to show/hide automation lanes. Waveform/amplitude slider Key / gesture: ⇧ [ / ⇧ ] or drag Keys reduce/increase waveform display gain by 0.25×. Recording and playback share automatic peak visibility gain (up to 16×) plus this slider. Live recording is a filled envelope; its display gain adapts as louder input arrives. Display gain never changes recorded audio or LED/dB meter readings. SPEED Key / gesture: ⌘ [ / ⌘ ] or drag slider Reduce/increase audible playback speed by 0.01× with the keys, within 0.5–2×. Disabled while recording. 1× Key / gesture: ⌘ 0 or click Restore normal playback speed. Track-name divider Key / gesture: Drag line after names Widen/narrow the name column. Function buttons, meters and their hit targets follow it. Outer header divider Key / gesture: Drag header/timeline boundary Resize the overall track-control/meter area independently. Scroll tracks vertically Key / gesture: Two-finger vertical swipe Scroll up/down; a vertical swipe is not intended to move the view horizontally. Scroll horizontally Key / gesture: Two-finger horizontal swipe Move across the timeline/console. Keep the gesture predominantly horizontal. CONSOLE ZOOM 1 / 2 Key / gesture: Click bottom-right preset Choose the compact/full console zoom preset. i information button Key / gesture: Click beside CONSOLE ZOOM Toggle floating hover descriptions throughout the app. Parameter tips show the name/current value and one short gesture line: Shift-drag for fine adjustment, right-click to type, double-click to reset where available. A few controls add one brief context line (spring range, pitch units or synced delay). Detailed explanations stay in Help rather than repeating in each tip. In numeric entry Return applies and Escape cancels. Transport and Undo tips show their keys. Numeric entry and active-drag values still work with information off. ======================================================================== WAVEFORM EDITING Use the waveform context menu for predictable audio editing. Original source files are retained. ======================================================================== Locate / select audio range Key / gesture: Click / drag waveform Click locates the playhead and clears previous edit-range highlights. An enabled cycle remains visible separately on the timeline ruler. Drag selects one time range in that track, replacing the previous range on any track. Finishing a new drag updates an enabled cycle. Track multi-selection and automation-point selection are separate. Waveform tools Key / gesture: Right-click waveform Open Delete Selection / Clip, Mute Selection, Unmute Selection, Trim to Selection, Select All, Undo and Rename Track. The menu opens beside your right-click on the waveform selection, not at the window corner, and adjusts near screen edges. Automation tool menus also open beside the click. Delete Selection / Clip Key / gesture: Right-click → command Non-ripple deletion: clear only the selected audio, leaving a silent gap of exactly the same length. Audio before/after it and every other track keep their timeline positions; nothing slides left. Selecting the full clip removes it from the session without rescaling the remaining waveforms. The source recording is retained; Command-Z restores the edit. Delete/Backspace also deletes an audio range when the waveform has focus; automation-lane deletion still removes only selected points. Mute / unmute selection Key / gesture: Right-click → command Set/remove non-destructive muted ranges. Without a range, the operation can cover the whole clip. Trim to selection Key / gesture: Right-click → command Use the selected range as the clip’s start/end. Original audio is retained. Select whole clip Key / gesture: Right-click → Select All Select this clip’s full range, replacing any previous waveform range. Different from ⌘ A, which selects tracks. Undo audio edit Key / gesture: ⌘ Z / menu Undo Restore the prior session/media reference when undo is available. ======================================================================== AUTOMATION: MODES & DRAWING Global OFF/READ/WRITE buttons are intentionally locked during playback/recording. Stop first to change global mode. ======================================================================== Global OFF / READ / WRITE Key / gesture: Click track-toolbar buttons Set the mode for tracks, buses, FX returns and master. Mixed individual modes may leave no single global mode highlighted. AUTO: MIXED means channels have different modes; unlit global READ/WRITE buttons do not mean automation is off. Mix Assistant enables READ only on tracks receiving rides, so a mixed state is normal. Stop playback, then click global OFF to disable all saved curves. Individual channel OFF ignores its curves and holds the stored fader value. READ follows the saved curve; displayed movement never writes into the stored mix. Unrelated edits and track-strip refreshes preserve the current READ position. Per-channel OFF / READ / WRITE Key / gesture: Click bottom of channel strip Set that channel’s automation mode. Master OFF / READ / WRITE Key / gesture: Click below master fader Set master automation mode. OFF Key / gesture: Mode button Do not apply that channel’s automation curves. READ Key / gesture: Mode button Play the saved automation curves. WRITE Key / gesture: Mode button Capture supported parameter changes while the transport rolls. The recorded Write pass returns to Read when finished. Show a curve Key / gesture: AUTO, then lane header AUTO reveals existing lanes. Click an automation lane’s header to choose among that channel’s saved curves. Choose drawing tool Key / gesture: Right-click automation lane Select Pencil, Line, Parabolic, Select / Move Points or Locate. There are no dedicated P/L tool keys in the current mapping. Pencil Key / gesture: Choose tool, then drag Draw a freehand automation curve. Line Key / gesture: Choose tool, then drag Draw a straight ramp between the start and end values. Parabolic Key / gesture: Choose tool, then drag Draw a curved/parabolic ramp. Select / Move Points Key / gesture: Choose tool, then drag Move an existing point, or select a range of points. Stop playback for point editing/deleting. Fine automation edit Key / gesture: ⇧ + drag Reduce gesture movement; pencil sampling also uses finer resolution. Delete points Key / gesture: Delete / Backspace or context menu Delete the selected automation points when the automation canvas has focus and editing is allowed. Resize automation lane Key / gesture: Drag its lower edge Change that automation lane’s height independently of the audio-track V zoom. Drawing availability Key / gesture: Transport state Automation drawing is blocked during recording. Some selection/move/delete operations also require playback to be stopped. ======================================================================== CONSOLE STRIPS, LINKING & ROUTING The CH sidebar shares the selected channel’s real session controls; it is not a separate mixer. ======================================================================== VU meter Key / gesture: Click Open an enlarged meter. A channel meter and an output/master meter can remain open together. Meter PRE / POST Key / gesture: Click Choose pre-/post-fader meter position. TRIM Key / gesture: Drag knob Adjust input trim. Shift-drag is finer; click its numeric readout for entry. PAN / BAL Key / gesture: Drag knob Set mono-channel pan or stereo bus/return balance. C means centre. Ø polarity Key / gesture: Click Toggle polarity inversion on the input channel. HPF / LPF switches Key / gesture: Click Enable/disable the high-pass or low-pass filter. HPF / LPF knobs Key / gesture: Drag / numeric readout Adjust cutoff frequency. Manual entries can use k or kHz suffixes, where supported. DYN Key / gesture: Click Open channel compressor/gate controls. EQ Key / gesture: Click Open the channel equaliser. Tall-console layouts may show EQ inline. SENDS Key / gesture: Click Open eight FX sends. Tall-console layouts can show sends inline. Routing LR Key / gesture: Click Toggle assignment to the stereo master. Routing 1–8 Key / gesture: Click Assign/toggle the input channel’s group bus destination. Fader Key / gesture: Drag its cap Adjust level. Clicking the empty rail does not jump the fader. Fader with trackpad Key / gesture: Two-finger vertical gesture over travel area Adjust the fader using its dedicated gesture handling; ordinary wheel events are not parameter edits. Reset fader / knob Key / gesture: Double-click cap / knob Restore that control’s configured default. Double-clicking the empty fader rail does not reset it. Type a parameter value Key / gesture: Click numeric readout Open compact manual entry, type a number, then Return. Escape or dismissal cancels. Knob numeric entry Key / gesture: Right-click knob Most parameter knobs open value entry. Exceptions include FX send knobs, which reveal their return. SOLO / MUTE Key / gesture: Click strip buttons Toggle channel solo/mute. Clear all solos / mutes Key / gesture: Small S / M Clear buttons immediately right of WRITE in Tracks, or S clear / M clear at master Clear the corresponding flags across tracks, buses and FX returns, without clearing the other state. Each clear is one Undo edit. Active states use the same yellow/red flashing indicators as the master buttons. Mouse only; no new keyboard shortcut. Link channels Key / gesture: Select channels; right-click console strip Choose Link Selected Channels. Linking couples supported controls; it is not just a label highlight. Unlink channels Key / gesture: Right-click → Unlink Selected Channels Remove the selected channels’ links. Highlight linked names Key / gesture: Right-click → Linked Channel Colour Choose a colour or Show Colour Palette. Link Selected in Colour can create a coloured link directly. Reveal a bus from routing buttons Key / gesture: Right-click a numbered routing button on a channel strip or in the routing editor Switch to BUSS and reveal the corresponding group bus (1–8), without changing routing or opening the channel menu. Left-click still changes the bus assignment. Also works from the channel strip in Tracks. Reveal an FX return from sends editor Key / gesture: Right-click its send knob Switch to BUSS and reveal the corresponding FX return. ======================================================================== CHANNEL PROCESSING PANELS All controls below are mouse-operated; no dedicated per-parameter keys are assigned. ======================================================================== EQ IN Key / gesture: Click Enable/bypass the four-band channel EQ. EQ HF / LF Key / gesture: F and G knobs Adjust high-/low-shelf frequency and gain. EQ HM / LM Key / gesture: F, G and Q knobs Adjust high-/low-mid frequency, gain and bandwidth (Q). Dynamics PRE / POST Key / gesture: Click position selector Choose pre-/post-fader dynamics position. COMP / GATE Key / gesture: Click switches Enable/bypass the channel compressor or gate independently. Compressor controls Key / gesture: Drag knobs / enter values Threshold, ratio, attack, release and makeup gain. Gate controls Key / gesture: Drag knobs / enter values Threshold, range, attack and release. GR / GT meters Key / gesture: Display only Compressor/gate reduction indicators. Input-channel compressor reduction has no peak-hold marker. Send levels 1–8 Key / gesture: Drag / numeric readout Set individual FX send levels. Send PRE / POST Key / gesture: Click per send Choose whether that send follows the channel fader. Routing editor Key / gesture: Click LR / bus buttons Toggle master routing or choose the bus destination. FX routing also includes bypass. ======================================================================== FX RETURNS & PROCESSOR PANELS These have no dedicated keyboard shortcuts. Use the common knob gestures and the controls listed here. ======================================================================== Processor selector Key / gesture: Click FX return dropdown Choose Unassigned, Space Echo, Stereo Delay, Vintage Reverb, Spring Reverb, Stereo MicroShift, Analogue Chorus, Dual Optical Phaser, Circuit Flanger or Atum Multi-Effects. Neighbour crosstalk (XTALK screw) Key / gesture: Drag the small screw right of master POST; Shift for fine adjustment; right-click for manual value; double-click resets to minimum Global bleed between immediately adjacent numbered input channels, not left/right stereo crossfeed. Default/minimum 0% adds nothing and preserves the existing sound, including in older sessions. Increase to add low-pass-filtered post-fader neighbour bleed; 100% is -40 dB per neighbour before the destination fader. Adjustments are smoothed. Source/destination mute and solo are respected; bleed follows the receiving channel's LR/group routing and fader, not its sends. No wraparound or cascading; group/FX-return-to-return bleed is not added. Session Save/Open and Undo retain the setting; MIDI Learn is supported. This is an optional host bleed model, not a new schematic simulation or an absolute measurement of all existing crosstalk. No dedicated keyboard shortcut. FX EDIT Key / gesture: Click Open the selected return’s processor in a movable, non-modal floating window. Several FX editors may remain open while mixing; opening the same editor again raises it instead of closing it. Close with its window X or Escape; F1–F5 view shortcuts still work outside text entry. An unassigned return opens a compact chooser with an aligned title, small close X, processor dropdown and a short hint; choose an effect to reveal its controls. A dark-green selection identifies an assigned effect. Hover information follows the global i toggle. BYPASS Key / gesture: Click Bypass the return’s effect processing; assignment remains selected. FX return strip Key / gesture: Use BAL, EQ, DYN, filters and fader Set balance, return level and processing. Tall layouts support expanded return EQ. Selecting an effect in the return strip or FX EDIT automatically switches that return's LR output on (also via MIDI Learn). Effect selection and LR routing undo together. You can still switch LR off manually; changing parameters does not switch it back on. Unassigned and reopening a saved session preserve LR state. Send levels, return level, mute and bypass are unchanged. PRESETS Key / gesture: Click inside effect panel Choose a processor preset from its menu. Space Echo Key / gesture: Knobs + head selector DRIVE, BASS, TREBLE, TONE, TIME, FEEDBACK, WOW/FLUTTER, RETURN; choose heads 1, 2, 3 or 2+3. Stereo Delay: timing Key / gesture: SYNC / milliseconds / TAP / BPM Switch between tempo-sync note divisions and millisecond timing; tap a tempo or set BPM. Stereo Delay: time arrows Key / gesture: Click / hold; ⇧ for fine 1 ms per step; Shift uses 0.1 ms. Hold to repeat. Double-click a time display for entry in millisecond mode. Stereo Delay: other controls Key / gesture: Knobs / PING toggle Left/right time or note division, feedback, low/high cut, modulation depth/rate, colour, ducking, ping-pong and return level. Vintage Reverb Key / gesture: Mode selector + knobs HALL / PLATE / GATED; decay, predelay, size, diffusion, damping and modulation depth. Gated mode exposes hold, release and threshold. Atum Multi-Effects Key / gesture: FX return processor selector → Atum Multi-Effects → FX EDIT Original ATUM dual-engine pitch/delay effect. Engine A feeds left and B right; each has pitch (-12 to +12 semitones), additional delay (5–1500 ms) and level. One hundred cents equal one semitone, so 0.07 st is 7 cents. This is a 100% wet send effect; use the return fader and channel sends to blend it. No dedicated keyboard shortcut. Atum Multi-Effects programs Key / gesture: Program dropdown / PROGRAMS button 72 numbered original programs in seven category submenus: Original starters (6), Vocal doubles (11), Ensemble (11), Echoes (11), Pitch intervals (11), Motion (11) and Atmospheres (11). The original six starting points are unchanged. Choosing a program replaces this processor's parameters in one Undo edit, not the return fader, routing or source audio. All parameter values save/reopen with the native session; exact bank matches show their program name after reopening or Undo/Redo. Other edits show Custom. There is no separate program-name field to become out of date. Pitch intervals are fixed chromatic shifts, not automatic key-aware harmonies; atmosphere programs use pitch/delay feedback, not a new reverb algorithm. Earlier app versions may show Custom for newer recipes but Test 71/72 retain their parameter sound. Atum Multi-Effects controls and latency Key / gesture: Knobs; Shift-drag fine; right-click numeric entry; double-click reset Feedback controls repeat amount (maximum 0.85); Cross Feed moves the feedback between the two engines. Low/High Cut shape both paths, Mod Depth/Rate move the delays, and Width zero gives mono. Parameter changes are smoothed; moving delay/pitch can audibly bend or smear the sound. The spectral shifter uses 2048 samples of analysis latency (42.7 ms at 48 kHz) plus an 8 ms modulation offset and the chosen delay; shifted transients can spread around the nominal delay. This is not a zero-latency monitoring processor. No tempo-sync, reverb, reverse, intelligent harmony/key tracking, converter emulation or arbitrary patching is included in this first version. Hover information follows the global i toggle; numeric entry still works with i off. Spring Reverb Key / gesture: Knobs + draggable spring endpoint Drive, decay, tension, dispersion, damping and width, plus a modelled spring length on the graphic. Length changes spring propagation time; tension remains independent. Spring length on graphic Key / gesture: Drag gold endpoint; Shift-drag for fine; click inches readout or right-click for numeric entry Adjust all three modelled springs from 4.0 to a maximum 16.5 inches. Return applies a typed value; Escape cancels. Double-click the endpoint resets to 12 inches. Dragging the blank tank area does not jump the length. One drag is undoable with Command-Z; length is saved with the return and restored by Undo/Redo. Old sessions/presets without length use 12 inches and retain the original spring sound. The inches scale is a nominal model reference, not a measured hardware-tank calibration. No dedicated keyboard shortcut. Stereo MicroShift Key / gesture: Knobs Left/right pitch and delay, modulation depth/rate, tone and feedback. Use the return strip fader for level. Analogue Chorus Key / gesture: Mode 1–4 + knobs Depth, rate scale, tone, drive and width. Dual Optical Phaser Key / gesture: Routing / wave / link / reverse buttons Stereo A/B, mono-to-stereo or series routing; A/B sine/square waveforms, link and reverse switches. Dual Optical Phaser: knobs Key / gesture: Drag / enter values A/B rate, depth and feedback; centre frequency, drive and width. Circuit Flanger Key / gesture: MONO / DUAL STEREO + knobs Manual position, depth, rate, resonance, drive and width. Panel close X Key / gesture: Click; Escape in focused popup Close the editor. Many transient panels also dismiss on outside click; persistent meters/FX panels can remain open. ======================================================================== STEREO MASTER, TAPE & MIXDOWN RECORDER The main transport REC records input tracks. MASTER RECORD records the stereo mix: use the correct recorder. ======================================================================== Master VUs / LED meters Key / gesture: Click VU; PRE / POST selectors Inspect stereo master levels and choose meter position. Calibration is 0 VU = −18 dBFS RMS. Master fader Key / gesture: Drag cap / click value Set the stereo master level. Uses the same safe cap-only drag/reset behaviour. COMPRESSOR / MASTER EQ / TAPE EMULATION Key / gesture: Click section headers Expand the master processing sections. Enabled master processor buttons turn green. Master compressor Key / gesture: IN + knobs INPUT applies true gain before compression, raising audio level and compression drive. OUTPUT is independent post-compression makeup gain. More GR reduces the audible increase from INPUT; bypass ignores both gains. Ratio, attack and release shape compression. From Test 101, older sessions with nonzero INPUT may sound louder: start at 0 dB and check master peaks. Master EQ Key / gesture: EQ IN + HIGH / MID / LOW F/G/Q Enable EQ and adjust band frequency, gain and Q. FLAT Key / gesture: Click master EQ button Reset the three master EQ gains to zero. Tape electronics Key / gesture: Original / Circuit Select the electronics model. Tape formulation Key / gesture: 456 / SM468 / SM900 Select tape formulation. Tape speed Key / gesture: 7.5 / 15 / 30 Select tape speed in inches per second. Tape IN / INPUT / OUTPUT Key / gesture: Click / knobs Enable tape processing and set its input/output gain. MIX ASSISTANT Key / gesture: Click in the master channel, directly above COMPRESSOR Stop playback/recording, then analyse loaded tracks locally. Review channel, bus, FX-return and master recommendations, choose categories and Apply selected. Covers levels, pan, filters/EQ, compression, sends/FX, routing and master settings. Uses measurements/rules, not a trained AI model; no uploads. Bus estimates are not post-effects renders. Automation, recordings and original DSP code are protected. Trim, polarity, gates, existing routing and tape character are retained where no safe change is justified. Cancel or starting playback/recording cancels unfinished analysis. Analysis status has a light-green background with a track-count progress fill. Successful completion turns the whole bar green with white text. Cancelled or failed analysis returns to neutral; starting again resets the fill. Green confirms analysis only: no mix changes occur until Apply selected. Stop playback/recording before Apply selected. Selecting channels, switching views or zooming after analysis does not invalidate it, and Apply preserves your current view. Audio/mix changes still require fresh analysis. Read the status: Applied confirms success; a red Not applied message explains a blocked operation. Untick or Restore all to revert; Undo remains available. If Apply is unavailable after analysis, Nothing to apply explains whether no audio is loaded or all analysed strips are protected. Review the track recommendations; existing automation and protected sources are not overwritten. Assistant track / bus / FX / master checkboxes Key / gesture: Click checkbox Before Apply, choose which strips to include. After Apply, untick to restore that strip's assistant-owned parameters; tick to reapply while stopped. Linked channels apply/restore together. Other selected strips and unrelated manual edits are preserved. A conflicting edit of an owned parameter blocks the operation rather than overwriting it. Assistant parameter categories Key / gesture: Levels / Pan / EQ / Dynamics / Sends / FX returns / Routing / Master / Automation Choose which settings to apply. After Apply, unticking a category restores those settings. FX returns includes return processing; Master controls the master recipe. Levels/EQ/Dynamics apply to selected channels and buses. Unticking Sends restores assistant send levels without changing other strip settings. Assistant Automation Key / gesture: Click Automation category (off by default) Propose gentle volume rides for eligible unlinked tracks, using 5-second source RMS windows. Requires at least 15 seconds and three active windows with 3 dB variation; maximum duration about 5.7 hours. Rides are bounded to +/-2 dB with linear ramps up to 0.5 dB/second and do not boost silent windows. No arrangement/phrase recognition is claimed. Existing automation, linked groups, buses, FX and master curves are not replaced. Apply selected adds lanes and READ mode as one undoable edit. Untick a track/category or Restore all removes only assistant additions and restores prior modes. Levels off bases rides on the original fader. AUTO in Tracks shows lanes. Later manual automation edits block assistant restore rather than being overwritten. Assistant Review selector Key / gesture: Click Review dropdown Read the Mix overview or choose any track/channel, linked group, bus, FX return or master. Clear text shows measurements, reasons, friendly parameter names, units, current-to-suggested values and an automation point preview where available. Reviewing does not apply audio changes or alter checkboxes. Selecting a checkbox also opens that strip's details. Only eligible checked categories apply; existing automation is protected. No dedicated keyboard shortcut. Assistant shared FX dependencies Key / gesture: Untick an FX-return checkbox or FX returns category Restores the return and the assistant sends depending on it. Re-tick to reapply. Does not silence or rewrite pre-existing sends unrelated to the assistant. New reverb/delay returns are proposed only in unused, unautomated slots with no existing sends. Assistant Restore all Key / gesture: Click Restore all Restore all active assistant changes, including parameters and newly created FX objects. Unrelated manual edits remain. Stop playback/recording first. Restore is itself undoable. Assistant Undo / Redo Key / gesture: Undo button / Command-Z / Shift-Command-Z Undo/redo the last session edit; keyboard commands also work while reading the assistant report. Checkbox states refresh after history changes. Assistant-added automation and READ modes undo together with mix parameters; existing curves, source audio and unrelated settings are not replaced by a whole-session reset. Assistant Keep mix Key / gesture: Click Keep mix Keep the current sound and release the assistant's old restore point without changing settings. Then Analyse again for a new starting point. To retain the ability to untick back to the old mix, do not use Keep mix yet. Restore all or Keep mix before re-analysing active suggestions. MASTER RECORD Key / gesture: Click section header Open the stereo mixdown recorder. Recorder WAV / AIFF Key / gesture: Click format selector Choose the mixdown file format. Recorder filename Key / gesture: Type into name field Set the output filename; Return finishes entry. Destination / reset Key / gesture: Click recorder buttons Choose a mixdown folder or reset to the session’s Mixdowns folder. Recorder RECORD Key / gesture: Click in master recorder Start/stop stereo mix recording. The session must be saved first. Take selector Key / gesture: Click dropdown Choose a recorded master take to audition. Audition PLAY / STOP Key / gesture: Click recorder controls Play/stop the selected take; main transport playback is separate. Audition locator Key / gesture: Drag Seek within the selected master take. Delete take Key / gesture: Click trash/delete; confirm Request deletion of the selected master take. This is a file operation, unlike removing a clip from the session. Open takes Key / gesture: Click recorder button Reveal the mixdown folder in Finder. ======================================================================== SETTINGS & MENUS Buttons without an indicated key are click/menu functions, not hidden keyboard shortcuts. ======================================================================== Settings → Session Key / gesture: Click tab New, Open, Save and Save As, plus session name/location. Settings → Audio Key / gesture: Click tab Select output/input device, master output pair, channel count, sample rate and buffer size. REFRESH Key / gesture: Click on Audio page Rescan audio devices and refresh the available choices. Settings → Recording Key / gesture: Click tab Choose/reset the recording audio folder; open the master recorder. Settings → View Key / gesture: Click tab Original/handwritten labels, Dark/Soft white theme and app scale. Settings → MIDI Key / gesture: Click MIDI tab; no dedicated keyboard shortcut On launch, ATUM restores controller connections after audio initialisation and workspace setup. Saved assignments and controller choices are retained; missing ports are not replaced with a different device. You do not need to clear or relearn assignments after an update. Configured devices is a list, not an exclusive operating mode: all enabled entries work together. Use ADD for another controller, name it, choose its profile, MIDI input and channel. For example, Mackie transport on one port and Generic MIDI Learn for an A61 on another can run at once. Selecting an entry only chooses which settings to edit; banks and encoder state are independent. Each physical input is opened once. Choose Generic MIDI Learn, Mackie Control Universal/Pro, PreSonus FaderPort V2/8/16, Behringer X-Touch/One/Compact, iCON QCon Pro/Pro X or Platform M+, KORG nanoKONTROL original/2 (CC template) or nanoKONTROL Studio (MCU). Panorama CS12 is listed as unavailable pending ControlCore integration. Select a specific input for MCU/KORG profiles; Generic also offers All inputs or Disabled, plus Omni/channel 1-16. MCU uses MIDI channels as fader addresses, so requires Omni and hardware in MCU mode, not HUI/Native. FaderPort 16 needs two distinct 8-fader input ports. REFRESH updates the port list. The profile and port/channel settings persist on this Mac. Missing ports stay unavailable. UC1 is intentionally excluded. KORG CC profiles also allow Omni/channel 1-16 matching the hardware template. MCU core input map: faders (soft pickup), relative pan, latched Solo/Mute, REC arm (existing input checks), selection, bank/channel navigation, master fader where present, transport, jog, Read/Write, click and Solo Clear. TRACK assigns trim; SEND assigns selected-channel sends 1-8; PAN restores banked pan; EQ assigns selected-channel EQ (press again for low shelf); DYN assigns selected-channel compressor/gate. F1-F5 selects Tracks/Console/Buss/Split/Settings. Learn may override core controls; remove that custom assignment to restore the preset. Unsupported hardware-specific buttons remain unassigned. No motor-fader/LED/display feedback or vendor handshake is sent; these are core MCU input presets, not full native integration. Physical hardware validation is still required. Add or name an unlisted MIDI controller Key / gesture: Settings / MIDI / ADD; edit Device name ADD creates a disabled Generic MIDI Learn entry. Enter a name and press Return or click elsewhere to save. Choose its real MIDI input and Omni or channel 1-16, then use MIDI LEARN for parameters. For an unlisted MCU-compatible device, select Mackie and put the hardware in MCU mode; this does not add proprietary protocols, drivers, motors or LED feedback. Up to 32 configurations persist on this Mac. Existing single-controller settings migrate without losing learned assignments. Missing ports remain unavailable; REFRESH never substitutes another port. Remove or disable a MIDI controller Key / gesture: Settings / MIDI / REMOVE or MIDI input → Disabled Removes only the selected configuration; at least one entry remains. Saved MIDI Learn assignments are retained. Other controllers keep working. Prefer specific inputs for predictable device isolation: a Generic All inputs entry intentionally accepts any connected port. One preset owns a port, including FaderPort 16's extender; conflicting preset assignments are rejected to prevent duplicate actions. Generic Learn may extend the same preset port; learned controls override that preset source without double dispatch. Device channels are filtered independently; MCU requires Omni. KORG nanoKONTROL original / nanoKONTROL2 Key / gesture: Settings / MIDI; hardware configuration in KORG KONTROL Editor Select the exact model and a specific MIDI input. Use CC mode, one matching MIDI channel (normally 1), controller range 0-127 and momentary CC buttons (On 127, Off 0). Write the following ATUM template to the device; the app does not program the hardware or assume an unchanged factory scene. Save/back up your existing hardware scene first. Original has nine strips; nanoKONTROL2 has eight. Faders: CC0-8 original / CC0-7 nanoKONTROL2. Pan knobs: CC16-24 original / CC16-23 nanoKONTROL2. Upper/Solo row: CC32-40 original / CC32-39 nanoKONTROL2. Lower/Mute row: CC48-56 original / CC48-55 nanoKONTROL2. nanoKONTROL2 REC row: CC64-71. Play CC41, Stop CC42, Rewind CC43, Forward CC44, Record/Punch CC45, Cycle CC46. On nanoKONTROL2, Track buttons CC58/59 bank by eight; Marker previous/next CC61/62 select adjacent channels. Original banks by nine from Settings bank buttons. Faders/pan use pickup, not MCU relative encoding. MIDI Learn can override these assignments. No hardware LED feedback is sent. KORG nanoKONTROL Studio Key / gesture: Settings / MIDI; choose nanoKONTROL Studio (MCU mode) Use the hardware's Studio One/Mackie mode (hold Scene + Track-left while powering on), not Pro Tools/HUI or Assignable mode. Choose its specific MIDI input and Omni. Uses ATUM's core eight-strip MCU input mappings; no motor/LED/display feedback or Bluetooth pairing is provided. Generic MIDI Learn remains available for a separately configured Assignable-mode setup. Physical hardware validation is required. Nektar Panorama CS12 status Key / gesture: Settings / MIDI; choose Panorama CS12 to see status Listed as unavailable / integration required, not as a working MCU preset. Nektar specifies ControlCore plus DAW-specific integration; ATUM does not yet implement that protocol. This profile disables its own MIDI input, Learn and bank controls rather than sending another controller's mappings; other configured devices keep working. Existing assignments and saved port choices are retained. Choose a supported profile to resume MIDI control. Installing ControlCore alone does not add ATUM support. Settings close Key / gesture: Click small X / SETTINGS again Close the Settings pane. File → Open Recent Session Key / gesture: Menu Open one of the latest 12 successfully opened/saved sessions. Missing files are disabled; current session is ticked. Clear Recent Sessions Key / gesture: Menu within recent sessions Clear the recent-file list only; do not delete session/audio files. File → Close Window Key / gesture: Menu Close Settings first if open, otherwise a processor popup, otherwise request app/window closure. No explicit ⌘ W assignment is in the custom shortcut map. Edit → Cut / Copy / Paste Key / gesture: Menu; text fields only Operate on the focused text editor. Audio copy/paste is not implemented by these menu entries. View menu Key / gesture: Menu Choose Tracks, Console, Buss, Split or Settings. Transport menu Key / gesture: Menu Play/Stop, Stop, Record, Return to Zero, Rewind and Forward. Window menu Key / gesture: Menu Detach/Recouple Tracks; Bring Main Window Forward. Help menu Key / gesture: Menu Both Keyboard Shortcuts and Shortcuts and Controls Guide open the same styled layout: workflow cards and Function / Key or gesture / How it works tables, with search and section selection. About ATUM STUDIO shows the logo, motto running version (1.0.1), registered owner's name and serial after successful online verification. Name not supplied is shown if the licence record has no name; unactivated copies show Not activated. These details belong to the app, not song files. Close with X, Close, Escape or Return without stopping playback. Studio Licence & Activation Key / gesture: Help → Licence & Activation Local UNRESTRICTED TEST builds are comparison candidates: all channel counts up to 64 and all nine effects work without activation, including after opening another song. Help activation is optional and deactivation does not restrict this candidate. These builds use separate preferences and are not the public Free/Full release or an exact Test 119 restoration. Free: 16 mono channels (stereo uses two) and Space Echo, Vintage Reverb, Analogue Chorus and Spring Reverb. EQ, dynamics, groups/returns and master processing are included. Full: up to 64 mono channels and all nine effects after online verification. Enter a Studio serial using Help → Licence & Activation; activation is not in Settings. Changes wait until stopped. Full-only sessions remain protected in Free; activation restores access without reinstalling or deleting data. The app retains your serial and automatically verifies it online after restart; you do not need to re-enter it. A successful verification is required to unlock Full. Loading another song or choosing New Session retains the verified licence for that running app. If verification fails, the serial stays saved; check the connection and retry in Help. Studio serials are separate from plugin serials. No dedicated key. Pre-count for recording Key / gesture: ⌘ ⇧ P, PRE COUNT beside LOAD SELECTED, or Transport / Pre-count settings Settings / Recording: Off, 1 or 2 bars in 4/4, using SESSION BPM (30–300). Counts before recording from stopped only; Stop cancels it. The count-in stops at capture start; METRONOME may continue separately. Click is monitor-only. Use headphones to avoid acoustic bleed. Tempo and count are saved; rolling punch stays immediate. Track take alternatives Key / gesture: ⌘ ⇧ T, square three-line Takes icon between Undo and Automation, or Transport / Track takes; ⌘ Z to undo a choice Opens a compact list at the far left of Tracks, following the selected track while stopped or playing. Click previous audio or a recorded take to recall it at the current playhead position; the current take is highlighted and an enabled cycle keeps its absolute range. Recording/import blocks changes. Command/Shift-click selects labels without recalling audio; right-click a row for Rename/Delete. Click the three-line icon again or x to close. Each alternative recalls the whole track and edit state; later punch versions retain earlier material. No files are deleted. Collected Save As includes listed inactive takes. This is not a comping editor; take switches are not crossfaded. Metronome Key / gesture: ⌘ K toggles; ⌘ ⇧ K opens settings; click/right-click METRONOME Click sounds only while playing/recording; Stop also turns the button Off. Pre-count remains separate. Right-click opens Session tempo (30–300 BPM), Click volume (-60 dB/Mute to 0 dB/original level) and Click output. Choose Main output or a supported stereo pair on the same interface, such as Outputs 3-4 for a headphone feed. A separate pair carries click only, not a cue mix; the interface must route that pair to the headphones/headphone amplifier. Stop playback/recording to change the pair. The pre-count follows this pair too, at its separate fixed level. Unavailable saved pairs are shown disabled and do not send click to the main output. Tempo, volume and click pair save with the session; each edit can be undone. Volume remains adjustable while recording; tempo is locked. Click is excluded from track/master files; use headphones to avoid acoustic bleed. Main output remains set separately in Audio settings. Tap session tempo Key / gesture: T or TAP button beside METRONOME Tap at least two beats; up to six intervals are averaged. The button displays BPM. A pause over 2.1 seconds starts a new estimate; very rapid clicks are ignored. Sets shared session/count-in BPM and Stereo Delay BPM SYNC timing across returns. Editing a delay's BPM also updates the shared tempo. Millisecond-mode delays keep their manual times; other effects without BPM SYNC are not retimed. This is manual tap tempo, not audio BPM detection. Cycle selected timeline Key / gesture: L; or click the loop icon beside Follow Drag a waveform range, then press L to repeat that timeline range across all tracks. Press L again to turn off. Ignored while typing in a name or value field. Stop pauses cycling; Play resumes it. The green ruler marker shows the active absolute cycle range even after clicking outside or clearing the edit selection; L turns it off. A new selection updates an active cycle. Playback only: track/master recording disables it. Choose Off/Read automation first; Write disables cycling. Arbitrary cut points may click; no automatic crossfade is applied. Rename several takes Key / gesture: Command/Shift-click in Takes, then RENAME; no dedicated key Command/Shift-click takes to select labels without recalling audio, then click RENAME. Right-click any individual row → Rename Take renames only that take. While stopped, Rename audio files on disk is checked by default: it updates the filename (keeping its extension), take label and current loaded clip path. Existing filenames, shared audio, links and missing files are protected. Disk changes clear Undo/Redo; save this session afterwards, and note that other saved sessions may still refer to the old filenames. Uncheck for labels only. During playback the disk option is unavailable and label renaming continues without seeking. Multiple labels become Name 01, Name 02, etc.; one selected take gets the exact name. Ordinary clicks recall takes while stopped or playing; the playhead and enabled cycle range remain unchanged. A shorter take is silent outside its audio within the retained cycle. Capture/import locks take changes. Command-Z restores label-only changes using normal session Undo, which stops playback; it does not undo disk renames. Delete an individual take Key / gesture: Right-click a take row → Delete Take (keep audio file) Removes only that row from the track's take list, including during playback. Audio files are not deleted, and the current playing clip is retained even if its take-list entry is removed. Command-Z restores the entry through normal session Undo. The popup targets only the clicked take; switching tracks or changing the list invalidates stale popup actions. Recording/import blocks changes. This is different from deleting a master recorder file. Permanently delete take audio Key / gesture: Right-click a take row → Delete Permanently from Disk Stop playback/recording first. A loaded take can also be deleted; confirmation warns that this clears its current track clip. Confirmation shows the full file path; Cancel is the default. Deletes the exact confirmed audio file, bypassing Trash, and removes its take entry. Cannot be undone: this also clears session Undo/Redo history. References from other tracks/takes or the master recorder are blocked, as are missing files, folders and symbolic/hard links. Session/file changes during confirmation abort deletion. Other sessions or saved copies may still reference the file. Save this session afterwards to retain the take-list update. Use keep-audio removal for a reversible choice. No keyboard shortcut. Recording buffer target Key / gesture: Settings / Recording / REC BUFFER Defaults to 96 samples, replacing the old 128 target. Before recording from stopped, lowers a larger device buffer to the smallest supported size at or above the target; an interface without 96 may use 128 instead. Choose 64, 96, 256 or Use Audio setting. Existing 64/256/Use Audio choices are retained. Never increases an already smaller buffer or changes the buffer during rolling punch/capture. Smaller buffers need more CPU; use a larger setting if you hear dropouts. Effects and interface conversion add latency; this is not a measured round-trip guarantee. Channel settings copy / paste Key / gesture: Right-click a console strip → Channel Settings; or Edit → Channel Settings Copy the selected strip's sound, then open the destination strip's menu and Paste Channel Settings. Channels, stereo buses and FX returns have separate compatible clipboards/presets; copying another channel type replaces the channel clipboard. Includes gain, pan/balance, filters, EQ, dynamics, sends and routing where available. Changes only the destination strip, not linked partners. Track names, audio, input assignment, REC/MON, Solo/Mute, link groups and automation stay unchanged. No dedicated key; ordinary text Copy/Paste is unchanged. Effect settings copy / paste Key / gesture: FX EDIT → PRESETS; or Edit → FX Return Settings Copy Effect Settings, then open PRESETS on another return using the same processor and Paste Effect Settings. Includes all parameters of that effect, not the return's level, routing or bypass. Supports all nine processors including Atum Multi-Effects. Session BPM is retained. Factory Presets remain available; Atum Multi-Effects Factory Programs opens its 72-program selector. No dedicated key. Save / recall user sound presets Key / gesture: Channel Settings or effect PRESETS → Save User Preset / Recall User Preset Give the current sound a name. Presets are stored in the app's local preferences and available across sessions and app restarts; not embedded in the song or exported as audio. Repeated names get a numbered suffix without overwriting. Up to 512 presets. Recall lists only compatible channel/effect types. Edit → Master Settings saves/recalls the master faders, EQ, compressor and tape together. No dedicated key. Settings recall safety / Undo Key / gesture: Stop transport before Paste or Recall; ⌘ Z / ⌘ ⇧ Z Paste and recall require stopped playback, no recording/import/dialog or active parameter gesture. Each is one Undo/Redo edit. Copy/save do not change audio settings. Presets do not copy automation: existing Read automation can override recalled values on playback. Save the session to retain the applied mix in that song. ACCURACY & SCOPE Checked against the Test 118 keyboard map, native workspace, track/console handlers, parameter controls, processor panels, recorder and Settings/menu code. F1-F5 are assigned to view/Settings switching; audio processing is unchanged. Not every function has a keyboard shortcut. Save your session before recording/editing. The in-app Help guide is searchable. Search filters the table; Return or Next moves between matching controls. Choose a section or Clear to reset. Command-F focuses search. The Desktop print-ready HTML guide supplied the visual design; its earlier content may describe older builds. No separate Desktop PDF was found for this update.